Thursday, 15 August 2013

Image Project

The image I have chosen for this project is one of Erik Johansson's photos, a dog floating from balloons:



Firstly, I looked into finding an artist that I could mimic. After looking through all the designers and artists I chose Erik Johansson, as I liked the images he produced. I liked how Johansson uses humour in his photography to communicate to viewers. His images when seen at first are discreet and it is only after a few minutes of close observation that you realise the image is full of humour.

I knew attempting to recreate an image that is so well done, was going to be a very difficult task. Both with my little knowledge of Photoshop and only knowing a few tools, this project was going to be a challenge. Well I through myself in and gave it a go. I figured out a lot of new tools and different ways of making an adaptation of the photograph through tutorials online. 

I began practicing with Photoshop and creating my own image that reflected Johansson's intentions. I used his idea of making things not as they seem through humour. From this idea I created the following image:



When I finally started the true adaption of Erik Johansson's image the dog floating from balloons. Due to the small size of the images they appeared blurry, as shown by the image below. Assuming the process would come together. I believed the image could be made bigger or would eventually work out. Stopped in my tracks, I had to start again. This is the small image I can up with: 


Creation Process:

1. First of all I searched for a paddock with sky and clouds in the background. However, this time I made sure the settings were on large images. After finding a paddock I opened it up in Photoshop and began smudging and blurring the clouds, as it appeared in the original image.

2. I found an image of a woman walking with her arm slightly out. The image already appeared she was walking a dog, therefore she was still able to hold a black lead in her hand. Using the quick selection tool I was able to select the part of the image I wanted, in this case the woman. When using the quick selection tool, I learnt that by pressing on the minus brush I was able to click on certain areas I didnt want in the image. After selecting this, I clicked on refine edge and could feather and smooth out the jaggered edges. After this I was able to click on the move tool and move my selected image over to the paddock background. For the rest of the lead, I had to find another image whereby the same process occured.



3. Next I used the same process for displaying the dog in the image. However, I noticed the dog in the original image is on a slight angle. By selecting the image, pressing ctrl-t I was able to change the size by holding down shift, and moving the image to a preferred size. When the dog is still selected in a box, I could rotate him using the outside curved arrows. This allowed him to be presented on a slight angle. The same process was used for the strings of the balloons, as they could be positioned in the way I wished. 

4. The balloons were also crafted with the same process of using the quick selection tool etc. To have the balloons over lapping as they do in the original picture, I needed to move the layers around. By clicking auto-select, I could move anything in the picture. I moved the balloons around so that they were positioned in the same way Johansson displayed them.

5. The image I used for the string of the balloons, was too short. Therefore, I used the clone stamp tool by holding down alt and clicking on the area I wished to copy. Then by simply moving the mouse and clicking on the desired area to be cloned, I was able to imitate where the string was and make it longer.

6. Some strings needed to be bended, as they are seen in the original image. I attempted placing all the strings in the exact same positions as the original picture. To bend the strings, I ensured I was on the layer I wanted to change. Then by going to edit, transform and warp, a grid appeared and I could move the strings in certain wave like motions. I also used this tool for bending the lead, up to the dog's collar.



7. Using the Perspective crop tool I selected part of the image, which happened to be a diagonal part of the image. The Perspective crop tool, came up with a grid whereby I moved the corner and flared out the grid to form a rectangle. However, I had a problem the gravel was now upside down so by going to image- image rotation- 180 degrees, I was able to change the picture to the preferred side. 


8. Playing with the colour of the image, I wished to mimic the original. I found the original image consisted of some sunlight, therefore I chose to make the image more of a yellow colour. I used colour adjustments and dimmed the lightness as the original was quite a dark image. By going to Colour balance I skewed the level to the colour yellow. 


Finally, by going to layer and flatten image, I incorporated all the layers into one image. 

I found this project challenging at times, however by searching for the answers with the assistance of tutorials helped with the task. The most challenging thing for creating the image, was making it look real. This project was very beneficial as I learnt lots of things about Photoshop, that will surely help me with the future. I am happy with the overall result and believe it reflects the original image.

My adaption of Erik Johansson's image is: 



No comments:

Post a Comment